Contact us for New Equipment Sales:
1300 02 02 04
Designed for the modern pace of high-speed labeling with industry-proven technology delivering consistent reliability and effortless operation. Without the need for plant air and complex setups, this advanced system offers a straightforward user interface and state-of-the-art Wi-Fi connectivity to streamline your end-of-line processes with unmatched simplicity and efficiency.
Contact us for New Equipment Sales:
1300 02 02 04
| Specification | Value |
|---|---|
| Application Method |
Direct Apply (standard) with Intelligent MotionTM Label Drive Optional applicators: Front of Pack, Rear Corner Wrap, and Telescopic Tamp |
| Print Technology | Thermal Transfer printing with Intelligent MotionTM Ribbon Drive and Direct Thermal 53mm, 107mm, and 160mm printhead versions |
| Ribbon Width | Minimum 2.2” (55mm), 3.0” (76mm), 4.3” (110mm) (standard) and 6.4″ (162mm) / Up to 830m |
| Print Resolution | 300dpi (200dpi in emulation mode) |
|
Print Speed/ Throughput |
<4” label width up to 500mm/sec in standard mode and up to 750mm/sec in high speed mode >4” label width up to 400mm/sec in standard mode up to 150 packs/minute with a 4”x6” label dependent on label size and application |
| Emulations | ZPL, SBPL |
| Label Width/Length/Capacity | Width/length: 1.6” to 6.5” / 2.0” to 11.8” (40 to165mm / 50 to 300mm) Up to 400mm spool diameter (typically delivers over 9000 typical GS1 bar code labels per roll) |
| Interface | CLARiTYTM Controller with interactive on-board video tutorials |
| Connectivity | Ethernet, RS232, Configurable I/O (24V, PNP and volt free) and USB |
| Certification | CE and TÜV |
Direct Apply (standard) with Intelligent MotionTM Label Drive
Optional applicators: Front of Pack, Rear Corner Wrap, and Telescopic Tamp (see separate
data sheet)
Thermal Transfer printing with Intelligent MotionTM Ribbon Drive and Direct Thermal 53mm, 76mm, 107mm and 160mm printhead versions
300dpi / 200dpi emulation mode
Tool-free quick release printhead replacemen
<4.0” (10.2cm) label width up to 19.6in/sec (500mm/sec) in standard mode and up to
29.5in/sec (750mm/sec) in high-speed mode
>4.0” (10.2cm) label width up to 15.7in/sec (400mm/sec) in standard mode
Speeds are dependent on label size and application
Typically 150 packs per minute based on label length and case size
Faster throughput may be possible dependent on specific application details
Width: 2.2” (55mm), 3.0” (76mm) and 4.3” (110mm) (standard) and 6.4” (162mm)
Capacity: Up to 830m, including automatic ribbon save (< 1mm ribbon gap between successive prints irrespective of label size or speed)
Low Ribbon and End of Ribbon detection with predicted changeover time built in as standard
Width/length: 1.6” to 6.5” / 2.0” to 11.8” (40 to165mm / 50 to 300mm)
Capacity: Up to 400mm spool diameter (typically delivers over 9,000 typical GS1 bar code labels per roll)
Low Labels and End of Label Reel detection, with predicted changeover time built in as standard
Automatic adjustment for label/backing type and label size
1GB on-board label database, sufficient for 62,000 typical GS1 bar code label designs
Full downloadable font support using TrueType® fonts (including multiple languages and Unicode support); fixed, variable and merged text fields; flexible date/time formats; flexible shift code formats; auto best before date calculations and concession management; calendar rules; auto incrementing decrementing counters; multiple graphic formats supported (up to maximum print area); database linked fields; scalable text and text blocks
EAN 8, EAN 13, UPC-A, UPC-E, Code 39, GS1-128, Code 128, ITF, RSS (including 2D composite codes); others available upon request
Ethernet, Power-over-Ethernet, RS232, Configurable I/O (24V, PNP and volt free)
USB (for backup/restore and label upload), remote Control Videojet 9560 via a web browser
Compatible with Videojet CLARiSUITETM
Videojet binary and simple-ASCII protocols
Compatible with any label design software which supports Zebra or Sato print engines
Zebra (ZPL), Sato (SBPL) and Markem-Imaje (Cimcomms, DCP) protocol support
EtherNet/IPTM
PROFINET®
CLARiTYTM Controller with interactive on-board video tutorials
Arabic, Bulgarian, Czech, Danish, English, German, Greek, Finnish, French, Hebrew, Hungarian, Italian, Japanese, Korean, Dutch, Norwegian, Polish, Portuguese, Romanian, Russian, Serbian, simplified Chinese, Slovak, Spanish, Swedish, Thai, Traditional Chinese, Turkish, Vietnamese
No air required for standard Direct Apply labelling
90 – 260VAC (115W at 50 packs per minute)
Temperature Range: 5-40°C (41-104°F)
Humidity: 20 – 85% Relative, non-condensing
88.2lbs (40kg) (max, excluding ribbon and labels)
CE, TUV
Designed for common pre-printed, pressure sensitive labeling applications across personal care, food, household goods, pharmaceuticals, and industrial packaging, the Videojet 9310 delivers the results you need where it matters most.
Read More
Prints and applies up to four labels on two or three sides, processing up to 120 pallets/hour.
Read MoreReach out to our experts for product inquiries, sample requests, or site audits.
Fill out the form below and our team will get back to you promptly.